Konica Minolta 5550/5570 manual Configuring the Printer, IP address, the setting is not applied

Item	Description
Range of IP	Specify the range of IP addresses permitted access to the
address permit-	printer. Type the IP address at the beginning of the range
ted access	into the box on the left, and the IP address at the end of
	the range into the box on the right.
	Range: 0-255 for each xxx triplet
	Default: 0.0.0.0
	" To specify a single IP address, type the same IP
	address into both the box for the starting IP address
	and for the ending IP address, or type “0.0.0.0” into
	the box for either the starting IP address or the
	ending IP address.
	" If the starting IP address is larger than the ending
	IP address, the setting is not applied.
Access Refuse	If Enable is selected, the range of IP addresses refused
Address	access to the printer can be specified.
	A maximum of five ranges of refused IP addresses can be
	specified.
	If Disable is selected, the refused access setting is
	disabled.
	Choices: Enable, Disable
	Default: Disable
Range of IP	Specify the range of IP addresses refused access to the
address refused	printer. Type the IP address at the beginning of the range
access	into the box on the left, and the IP address at the end of
	the range into the box on the right.
	Range: 0-255 for each xxx triplet
	Default: 0.0.0.0
	" To specify a single IP address, type the same IP
	address into both the box for the starting IP address
	and for the ending IP address, or type “0.0.0.0” into
	the box for either the starting IP address or the
	ending IP address.
	" If the starting IP address is larger than the ending
	IP address, the setting is not applied.
Apply button	Applies the configuration settings in this page.
Clear button	Resets all configuration settings to previous values.

244 Configuring the Printer