Konica Minolta 5550/5570 manual Configuring the Printer

Item	Description
Speed	Specifies the operating mode and speed for Ethernet.
	Choices: Auto, 10Base-T(Half), 10Base-T(Full),
	100Base-TX(Half), 100Base-TX(Full),
	1000Base-T(Full)
	Default: Auto
	Configuration Menu Equivalent:
	INTERFACE MENU - ETHERNET -
	SPEED/DUPLEX
Auto IP	Specifies the automatic assigning method for the printer
	IP address.
	Choices: DHCP/BOOTP
	Default: Checked
	Configuration Menu Equivalent:
	INTERFACE MENU - ETHERNET - TCP/
	IP - DHCP/BOOTP
IP Address*	Sets the printer’s IP address.
	Range: 0–255 for each xxx triplet
	Default: 0.0.0.0
	" If the specified IP address is outside of the
	allowable range, the value is not changed, even
	after the Apply button is clicked. The setting
	returns to the previous value.
	Configuration Menu Equivalent:
	INTERFACE MENU - ETHERNET - TCP/
	IP - IP ADDRESS
Subnet Mask*	Sets the printer’s subnet mask address.
	Range: 0–255 for each xxx triplet
	Default: 0.0.0.0
	" If the specified subnet mask address is outside of
	the allowable range, the value is not changed, even
	after the Apply button is clicked. The setting
	returns to the previous value.
	Configuration Menu Equivalent:
	INTERFACE MENU - ETHERNET - TCP/
	IP - SUBNET MASK

240 Configuring the Printer