Konica Minolta 5550/5570 manual Setting the Address Manually

Setting the Address Manually

You may also manually change the printer’s IP address, subnet mask, and gateway by using the following instructions. (See chapter 5, “Understanding the Ethernet Configuration Menus,” for more information.)

" When manually setting the IP address, turn off DHCP and BOOTP first. In addition, when the IP address is changed, add a new port or reinstall the printer driver.

CAUTION

You should always notify your network’s administrator before changing the printer’s IP address.

1

2

Turn on your PC and printer.

When the printer’s message window displays READY, set the IP address.

Press this (until) the message window reads . . .

key . . .

READY

PROOF/PRINT MENU

or if no optional hard disk is installed:

PRINT MENU

INTERFACE MENU

JOB TIMEOUT

ETHERNET

TCP/IP

Network Connection 113