Dell T710 owner manual Memory Settings Screen

Option	Description
F1/F2 Prompt on Error	Enables the system to halt on errors during POST, which
(Enabled default)	allows the user to observe events that may scroll by
	unnoticed during normal POST. The user can press
	<F1> to continue or <F2> to enter the System Setup
	program.
	CAUTION: When setting this option to Disabled,
	the system will not halt if an error occurs during
	POST. Any critical errors will be displayed and
	logged in the system event log.

Memory Settings Screen

Option	Description
System Memory Size	Displays the amount of system memory.
System Memory Type	Displays the type of system memory.
System Memory Speed	Displays the system memory speed.
Video Memory	Displays the amount of video memory.
System Memory Testing	Specifies whether system memory tests are run at system
(Enabled default)	boot. Options are Enabled and Disabled.
Memory Operating Mode	This field displays the type of memory operation if a
(Optional)	valid memory configuration is installed. When set to
	Optimizer Mode, the memory controllers run
	independently of each other for improved memory
	performance. When set to Mirror Mode, memory
	mirroring is enabled. When set to Advanced ECC
	Mode, two controllers are joined in 128-bit mode
	running multi-bit advanced ECC. For information about
	the memory modes, see "System Memory" on page 98.
Node Interleaving	If this field is Enabled, memory interleaving is supported
(Disabled default)	if a symmetric memory configuration is installed. If
	Disabled, the system supports Non-Uniform Memory
	architecture (NUMA) (asymmetric) memory
	configurations.
	NOTE: The Node Interleaving field must be set to Disabled
	when using Mirror mode.

Using the System Setup Program and UEFI Boot Manager

61