Dell T710 owner manual Removing a Hard Drive From a Hard-Drive Carrier

Figure 3-7. Installing a Hot-Swap Hard Drive

1

	2
1	release button	2	hard drive carrier handle

3Install the hot-swap hard drive.

a Press the button on the front of the drive carrier and open the handle.

b Insert the hard-drive carrier into the drive bay until the carrier contacts the backplane.

c Close the handle to lock the drive in place.

4Replace the front bezel. See "Installing the Front Bezel" on page 85.

Removing a Hard Drive From a Hard-Drive Carrier

Remove the screws from the slide rails on the hard-drive carrier and separate the hard drive from the carrier. See Figure 3-8.

92

Installing System Components