Dell T710 owner manual Replacing the System Battery

System Battery

Replacing the System Battery

WARNING: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. Before you begin this procedure, review the safety instructions that came with the system.

WARNING: There is a danger of a new battery exploding if it is incorrectly installed. Replace the battery only with the same or equivalent type recommended by the manufacturer. See your safety information for additional information.

1Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.

2Rotate the system feet inward and lay the system on a flat surface.

3Open the system. See "Opening the System" on page 85.

4Remove the cooling shroud. See "Removing the Cooling Shroud" on page 87.

5Remove the fan modules. See "Removing a Cooling-Fan Module" on page 136.

6Remove the fan cage. See "Removing the Fan Cage" on page 138.

Figure 3-27. Replacing the System Battery

7Locate the battery socket. See "System Board Connectors" on page 186.

CAUTION: To avoid damage to the battery connector, you must firmly support the connector while installing or removing a battery.

144

Installing System Components