Dell T710 owner manual PCI IRQ Assignment Screen, Serial Communication Screen

Option	Description
Embedded Video	Enables or disables BIOS support for the integrated video
Controller (Enabled	controller.
default)	NOTE: This field can be disabled only if an add-in video
	card is present. If this field is disabled, remote access
	features such as virtual KVM are not available.

PCI IRQ Assignment Screen

Option	Description
<PCIe device>	Use the <+> and <-> keys to manually select an IRQ
	for a given device, or select Default to allow the BIOS to
	select an IRQ value at system startup.

Serial Communication Screen

Option	Description
Serial Communication	Options are On without Console Redirection, On with
(On without Console	Console Redirection via COM1, On with Console
Redirection default)	Redirection via COM2, and Off.
Serial Port Address	Specifies the address of the serial ports.
External Serial Connector	Specifies whether Serial Device1, Serial Device2, or
(Remote Access Device	Remote Access Device has access to the external serial
default)	connector.
Failsafe Baud Rate	Displays the failsafe baud rate used for console
(115200 default)	redirection. This rate should not be adjusted.
Remote Terminal Type	Options are VT100/VT220 or ANSI.
(VT100/VT220 default)
Redirection After Boot	Enables or disables BIOS console redirection after the
(Enabled default)	operating system boots.

Using the System Setup Program and UEFI Boot Manager

65