Dell T710 owner manual Selecting Diagnostics Options, Viewing Information and Results

Selecting Diagnostics Options

From the Diagnostics Options area, select the test(s) you want to run on a device.

•Non-Interactive Tests Only — Runs only tests that require no user intervention.

•Quick Tests Only — Runs only the quick tests on the device.

•Show Ending Timestamp — Time stamps the test log.

•Test Iterations — Selects the number of times the test is run.

•Log output file pathname — Enables you to specify the diskette drive or USB memory key where the test log file is saved. You cannot save the file to a hard drive.

Viewing Information and Results

The following tabs in the Customize window provide information about the test and the test results.

•Results — Displays the test that ran and the result.

•Errors — Displays any errors that occurred during the test.

•Help — Displays information about the currently selected device, component, or test.

•Configuration — Displays basic configuration information about the currently selected device.

•Parameters — Displays parameters that you can set for the test.

184

Running the System Diagnostics