Dell T710 Following DIMMs should Match in size, Thermal sensor, Time-of-day, Clock stopped

Table 1-2. System Messages (continued)

Message	Causes	Corrective Actions
The following	Invalid memory	Ensure that the memory
DIMMs should	configuration. The specified	modules are installed in a
match in	memory modules do not	valid configuration. See
geometry:	match in size, number of	"General Memory Module
x,x,...	ranks, or number of data	Installation Guidelines" on
The following	lanes.	page 98.
DIMMs should
match in rank
count: x,x,...
The following
DIMMs should
match in size:
x,x,...
The following
DIMMs should
match in size
and geometry:
x,x,...
The following
DIMMs should
match in size
and rank count:
x,x,...
Thermal sensor	A memory module without a	Replace the memory
not detected on x thermal sensor is installed in		module. See "System
	the specified memory slot.	Memory" on page 98.
Time-of-day	Faulty battery or faulty chip.	See "Troubleshooting the
clock stopped		System Battery" on page 165.
Time-of-day not	Incorrect Time or Date	Check the Time and Date
set - please run	settings; faulty system	settings. See "Using the
SETUP program	battery.	System Setup Program and
		UEFI Boot Manager" on

page 57. If the problem persists, replace the system battery. See "System Battery" on page 144.

50

About Your System