Dell T710 E2110 Multibit Error, On Dimm ##, Reseat Dimm, E2111 SBE log, Disabled on, ##. Power

Table 1-1. LCD Status Messages (continued)

Code	Text	Causes	Corrective Actions
E2110	Multibit Error	The memory module in	See "Troubleshooting
	on DIMM ##.	slot “##” has had a multi- System Memory" on
	Reseat DIMM.	bit error (MBE).	page 167.

E2111 SBE log	The system BIOS has
disabled on	disabled memory single-
DIMM ##.	bit error (SBE) logging
Reseat DIMM.	and will not log anymore
	SBEs until the system is
	rebooted. "##" represents
	the memory module
	implicated by the BIOS.

Remove AC power to the system for 10 seconds and restart the system.

If the problem persists, see "Troubleshooting System Memory" on page 167.

E2112 Memory spared	The system BIOS has
on DIMM ##.	spared the memory
Power cycle	because it has determined
AC.	the memory had too many
	errors. "##" represents the
	memory module
	implicated by the BIOS.

Remove AC power to the system for 10 seconds and restart the system.

If the problem persists, see "Troubleshooting System Memory" on page 167.

E2113 Mem mirror OFF	The system BIOS has
on DIMM ## &	disabled memory
##. Power	mirroring because it has
cycle AC	determined one half of the
	mirror has had too many
	errors. "## & ##"
	represents the memory-
	module pair implicated by
	the BIOS.

Remove AC power to the system for 10 seconds and restart the system.

If the problem persists, see "Troubleshooting System Memory" on page 167.

I1910 Intrusion	System cover has been	Information only.
detected.	removed.
Check chassis
cover.

36

About Your System