Dell T710 System Board Jumpers, 185, System Board Jumper Settings Description, Boot pins

Jumpers and Connectors

WARNING: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. Before you begin this procedure, review the safety instructions that came with the system.

System Board Jumpers

For information on resetting the password jumper to disable a password, see "Disabling a Forgotten Password" on page 192.

Table 6-1. System Board Jumper Settings

Jumper	Setting	Description
PWRD_EN		(default) The password feature is enabled (pins 2-4)

The password feature is disabled, and iDRAC6 local access is unlocked at the next AC power cycle (pins 4-6)

NVRAM_CLR	(default) The configuration settings are retained at system
	boot (pins 3-5)

The configuration settings are cleared at the next system boot (pins 1-3)

Jumpers and Connectors

185