10Reconnect the system to power and restart the system.

11Enter the System Setup program and verify that the USB key has been detected by the system. See "Using the System Setup Program and UEFI Boot Manager" on page 57.

The USB connector must be enabled by the Internal USB Port option in the Integrated Devices screen of the System Setup program.

To boot from the USB memory key, configure the USB memory key with a boot image and then specify the USB memory key in the boot sequence in the System Setup program.

Figure 3-19. Removing or Installing a USB Memory Key

1

2

1 USB memory key

2 internal USB Port

124

Installing System Components

Page 124
Image 124
Dell T710 owner manual 124