Dell T710 owner manual Power Supplies, System cover PCIe expansion card slots

1 system cover

3 PCIe expansion card slots (6)

5heat sink blank (single-processor configuration)

7 system feet (4)

9SAS or SATA hard drives (up to 8 [3.5"] and 16 [2.5"])

11 tape drive (optional)

13internal SD module (optional)

15RAID battery (optional)

17integrated storage controller card

2 cooling shroud

4 cooling fan modules (4)

6memory modules (up to 18 total, 9 for each processor)

8heat sink and processor (1 or 2)

10control panel

12optical drive

14SAS backplane

16chassis intrusion switch

Power Supplies

Your system supports two 1100 W power supplies.

NOTE: The power supply label specifies the maximum power output.

If only one power supply is installed, it must be installed in the first power supply bay.

CAUTION: To ensure proper system cooling, the power supply blank must be installed in the second bay in a non-redundant configuration. See "Installing a Power Supply Blank" on page 83.

Installing System Components

81