Dell T710 owner manual System Messages

System Messages

System messages appear on the screen to notify you of a possible problem with the system.

NOTE: If you receive a system message not listed in the table, check the documentation for the application that is running when the message appears or the operating system's documentation for an explanation of the message and recommended action.

Table 1-2. System Messages

Message	Causes	Corrective Actions
128-bit Advanced	The Advanced ECC option	Check other messages for a
ECC mode	enabled in BIOS is no longer	faulty memory module.
disabled. For	valid due to an unsupported	Reconfigure the memory
128-bit Advanced	memory configuration,	modules for Advanced ECC
ECC, DIMMs must	possibly a faulty or removed	mode. See "System Memory"
be installed in	memory module. The	on page 98.
pairs. Pairs must	Advanced ECC setting has
be matched in	been disabled.
size and
geometry.
Alert! Advanced	Advanced ECC Memory	Ensure that the memory
ECC Memory Mode	Mode was enabled in the	modules are installed in a
disabled! Memory	system setup program, but	configuration that supports
configuration	the current configuration	Advanced ECC Memory
does not support	does not support Advanced	Mode. Check other system
Advanced ECC	ECC Memory Mode. A	messages for additional
Memory Mode.	memory module may be	information for possible
	faulty.	causes. For memory
		configuration information,
		see "General Memory
		Module Installation
		Guidelines" on page 98. If
		the problem persists, see
		"Troubleshooting System
		Memory" on page 167.

About Your System

39