Dell T710 E1620 Power Supply #, ### W Ac, Power error, E1624 Lost power, Redundancy, = ### W

Table 1-1. LCD Status Messages (continued)

Code	Text	Causes	Corrective Actions
E1620	Power Supply #	Specified power supply's	Check the AC power
	(### W) AC	AC input is outside of the	source for the specified
	power error.	allowable range.	power supply. If the
	Check PSU		problem persists, see
	cables.		"Troubleshooting Power
			Supplies" on page 165.
E1624	Lost power	The power supply	See "Troubleshooting
	supply	subsystem is no longer	Power Supplies" on
	redundancy.	redundant. If the	page 165.
	Check PSU	remaining power supply
	cables.	fails, the system will shut
		down.

E1626 Power Supply	The power supplies in the
Mismatch. PSU1	system are not the same
= ### W, PSU2	wattage.
= ### W.

Ensure that power supplies with matching wattage are installed. See the Technical Specifications outlined in your system’s Getting Started Guide.

E1629 Power required The system configuration

>PSU wattage. requires more power than Check PSU and the power supplies can

config.	provide, even with
	throttling.

Turn off power to the system, reduce the hardware configuration or install higher-wattage power supplies, and then restart the system.

E1710 I/O channel	The system BIOS has
check error.	reported an I/O channel
Review & clear	check.
SEL.

Check the SEL for more information and then clear the SEL. Remove AC power to the system for 10 seconds and restart the system.

If the problem persists, see "Getting Help" on page 193.

30

About Your System