Deleting or Changing an Existing Setup Password

1Enter the System Setup program and select the System Security.

2Highlight Setup Password, press <Enter> to access the setup password window. Press <Enter> twice to clear the existing setup password.

The setting changes to Not Enabled.

3If you want to assign a new setup password, perform the steps in "Assigning a Setup Password" on page 75.

Embedded System Management

The Unified Server Configurator (USC) is an embedded utility that enables systems and storage management tasks from an embedded environment throughout the server’s lifecycle.

The USC can be started during the boot sequence and can function independently of the operating system.

NOTE: Certain platform configurations may not support the full set of features provided by USC.

The following features of USC are supported on your system:

Installing an operating system

Running diagnostics to validate the memory, I/O devices, processors, physical disks, and other peripherals

Downloading and applying firmware updates

Configuring hardware and firmware

For more information about setting up USC, configuring hardware and firmware, and deploying the operating system, see the Dell Unified Server Configurator User’s Guide on the Dell Support website at support.dell.com/manuals.

76

Using the System Setup Program and UEFI Boot Manager

Page 76
Image 76
Dell T710 owner manual Embedded System Management