LCD Status Messages

The LCD messages refer to events recorded in the System Event Log (SEL). For information on the SEL and configuring system management settings, see the systems management software documentation.

NOTE: If your system fails to boot, press the System ID button for at least five seconds until an error code appears on the LCD. Record the code, then see "Getting Help" on page 193.

Table 1-1. LCD Status Messages

Code

Text

Causes

Corrective Actions

 

 

 

 

N/A

SYSTEM NAME

A 62-character string that

This message is for

 

 

can be defined by the user

information only.

 

 

in the System Setup

You can change the

 

 

program.

 

 

system ID and name in

 

 

 

 

 

The SYSTEM NAME

the System Setup

 

 

displays under the

program. See "Using the

 

 

following conditions:

System Setup Program

 

 

• The system is powered

and UEFI Boot Manager"

 

 

on page 57.

 

 

on.

 

 

 

 

 

• The power is off and

 

 

 

active errors are

 

 

 

displayed.

 

 

 

 

 

E1000

Failsafe

Check the system event

Remove AC power to the

 

voltage error.

log for critical failure

system for 10 seconds and

 

Contact

events.

restart the system.

 

support.

 

If the problem persists,

 

 

 

 

 

 

see "Getting Help" on

 

 

 

page 193.

 

 

 

 

E1114

Ambient Temp

Ambient temperature has

See "Troubleshooting

 

exceeds

a reached a point outside

System Cooling

 

allowed range.

of the allowed range.

Problems" on page 166.

About Your System

25

Page 25
Image 25
Dell T710 owner manual LCD Status Messages