Dell T710 owner manual Removing an iDRAC6 Enterprise Card, VFlash media slot VFlash SD card

Figure 3-26. Removing and Installing an iDRAC6 Enterprise Card

1	6
	5

2

	3		4
1	iDRAC6 Enterprise card	2	retention standoff tabs (2)
3	iDRAC6 Enterprise card connector	4	retention standoff posts (2)
5	VFlash media slot	6	VFlash SD card

Removing an iDRAC6 Enterprise Card

WARNING: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. Before you begin this procedure, review the safety instructions that came with the system.

1Turn off the system, including any attached peripherals, and disconnect the system from its electrical outlet.

2Rotate the system feet inward and lay the system on a flat surface.

3Open the system. See "Opening the System" on page 85.

4Remove the cooling shroud. See "Removing the Cooling Shroud" on page 87.

5Remove the fan modules. See "Removing a Cooling-Fan Module" on page 136.

6Remove the fan cage. See "Removing the Fan Cage" on page 138.

142

Installing System Components