Dell T710 owner manual Removing and Installing a RAID Battery RAID battery

Figure 3-21. Removing and Installing a RAID Battery

1

6

5

2

3

4

1	RAID battery	2	battery carrier release tab
3	battery carrier	4	battery carrier slots (2)
5	battery carrier tabs (2)	6	battery cable connector

Installing a RAID Battery

1Insert the RAID battery into the battery carrier. See Figure 3-21.

2Insert the battery carrier with the RAID battery into the battery carrier slots until the carrier release latch locks into place. See Figure 3-21.

3Connect the battery cable to the connector on the integrated storage card (see Figure 3-23) and replace the integrated storage controller card. See "Installing an Integrated Storage Controller Card" on page 134.

4Close the system. See "Closing the System" on page 86.

5Place the system upright and on its feet on a flat, stable surface.

6Rotate the system feet outward.

7Reattach any peripherals, then connect the system to the electrical outlet.

8Turn on the system and attached peripherals.

128

Installing System Components