E29

BASICS
If your telephone company requires pulse dialing, you
can switch-over to tone dialing after the call connects.
This feature is useful when you need tone dialing to
use any automated menu systems, such as telephone
bank tellers, telephone prescription refills, customer
support menus, etc.
If your phone is set to pulse dialing mode, make your call normally.
Once your call connects, press the /TONE/ key. Any digits you enter from
then on will be sent as tone digits. When this particular call ends, the phone
automatically returns to pulse dialing mode.
Tone Dialing Switch-over
ABC
SPEAKER INTCM
/HOLD
DEF
GHI MNO
PQRS WXYZ
TONE OPER
JKL
TUV
123
456
789
0
During a call, as you begin to move your handset too far from your base unit,
noise may increase. If you pass the range limits of the base unit, you will hear
a beep and see

Out of Range

on the display, and then the handset returns to
standby mode.
Traveling Out of Range
Privacy prevents interruption from other registered
handsets. This works only when the phone is in use.
Press the PRIVACYsoft key on the handset during talk
mode.

Privacy Mode On

and appear in the display. To exit the Privacy Mode,
press the PRIVACYsoft key again when the Privacy Mode is on.

Privacy Mode Off

appears.
Privacy Mode
Talk
MUTE
PRIVACY
Privacy Mode On
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 29