Sanyo CLT-D5880, CLT-D5882, CLT-D5883 - page 11

E9
GETTING STARTED
Mounting the Base Unit On a Wall
DO NOT use an AC outlet controlled by a wall switch.
IMPORTANT
Standard Wall Plate Mounting
This phone can be mounted on any standard wall plate.
1Put the AC adapter and the
telephone line cord through the
hole on the wall mount adapter.
2Plug the AC adapter into the
DC IN 9Vjack.
3Plug the telephone line cord into
the TEL LINE jack.
4Slide the wall mount adapter into
the notches on the base.
5Plug the AC adapter into a
standard 120V AC wall outlet.
Hook the cord on the notch of the
wall mount adapter.
6Plug the telephone line cord into
the telephone outlet. Hook the
cord on the notch of the wall
mount adapter.
7Align the mounting slots on the
base with the mounting posts on
the wall. Then push in and down
until the phone is firmly seated.
To remove, push up
the tab on the wall
mount adapter as
shown.
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 9