E47
MULTI-HANDSET FEATURES
The phone permits 3-way conversations between 2 handsets and an outside line.
1Initiate the call normally. Once the call is in progress, other people can
join the call.
2To join a conference call, press TALK/FLASHor SPEAKER on the other
handset.
3To leave a conference call, simply hang up as you normally would.
All other parties will remain connected.
4To end a conference call completely, all local parties must hang up.
The conference call will also end when the calling party hang up.
3-Way Conferencing
If you have two or more handsets, you can use them as an intercom.
Also, you can place an outside call on hold and transfer the call to another handset.
Intercom
1In standby mode, press INTCM/HOLD.
2Select the handset you want to talk with within 30
seconds. To select the handset, press VOL/▲or
VOL/▼, and then press the OKsoft key. If you select
All, all other handsets will be paged. An intercom tone sounds.
To cancel intercom, press the CANCELsoft key on the initiating handset.
3To answer the page, press TALK/FLASH,
INTCM/HOLD, or the ANSWERsoft key. If Anykey
Answer is enabled, pressing a number key,
/TONE/ , or #/ will answer the page.
If Automatic Talk is enabled, you can answer the page by simply picking
up the handset.
4
To hang up the intercom call, press ENDor the END soft key on either handset.
Intercom/Call Transfer Feature
To intercom
Handset #2
Handset #3
BACK DELETE OK
Intercom
Handset #1
ANSWER
• If the initial handset is in privacy mode, other handsets cannot join the call.
Note:
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 47