E16
USING THE INTERFACE

Room/Baby Monitor

This feature allows you to monitor
sounds in another room. Place a
handset in the room you wish to
monitor; it will function as a
microphone. A second handset
can be set to function as a remote
speaker, allowing you to monitor
sounds in the room.

Using Room/Baby Monitor

1Press the MENUsoft key and select the Room Monitor menu.

To Room Monitor

appears.
2Select the handset you want to monitor by using VOL/or VOL/.
3Press the OKsoft key.

RoomMonitor

appears, and you hear sounds in the
room where the handset is installed.
4To turn off the Room Monitor, press the ENDsoft key, or END.
During room monitor, if you receive a call, you will hear beeps from the
earpiece or speaker. Press TALK/FLASHto answer the call.
RoomMonitor
Handset #2
END
• This feature only works when the handset(s) is within the range of the base.
• You must have at least two handsets to use Room/Baby Monitor.
Notes:
UP800DH(CLT-D5880) OM 1/24/06 3:38 PM Page 16