UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 32

DIRECTORY

6 Distinctive Ring appears. Press VOL/▲ or VOL/▼ to move the pointer to one of the Distinctive Ring options and then press the OK soft key.

7 Speed Dial appears. Press VOL/▲ or VOL/▼ to move the pointer to select the Speed dial location (10 locations: SPD1-SPD0).

8 Press the OK soft key. You will hear a confirmation tone, and Done! appears in the display.

Distinctive Ring

No Selectn

Flicker

BACK DELETE OK

Speed Dial

No Selectn

SPD1:<Empty>

BACK DELETE OK

Movies

800-730-3456 Beethoven9/SPD1

BACK DELETE EDIT

Notes:

When the memory is full, you will hear a beep and Memory Full appears. You cannot store names and numbers.

The pause key counts as one digit. Pressing the PAUSE soft key more than once increases the length of the pause between numbers. Each pause represents a 2 second delay.

If you choose not to store a Distinctive Ring, simply select the "No Selectn" option.

If you choose not to store the name/number as a Speed Dial, simply choose the "No Selectn" option.

Selecting a speed dial location where a number is already stored releases the old number's speed dial setting. The new number will be stored in the speed dial location.

Chain Dialing

The memory locations in the handset are not limited to phone numbers.

You can also store a group of numbers (up to 20 digits) that you need to enter once your call connects. This is referred to as Chain Dialing.

An example of this is a bank account number. Store the account number in one of the phonebook locations (refer to "Phonebook (Storing Phone Numbers, Names, Distinctive Rings and Speed Dial)" on page E31). When you call your bank and are prompted to enter the account number, scroll through your phonebook locations until you find your account number, and then press the DIAL soft key.

E32

Page 34
Image 34
Sanyo CLT-D5883, CLT-D5880, CLT-D5882 instruction manual Chain Dialing