E46

MULTI-HANDSET FEATURES
The features in this section require a minimum of two handsets to operate.
To use this feature, you must enter the handsets into Walkie-Talkie mode first.
To enter Walkie-Talkie mode, see page E15.

Walkie-Talkie call

1When the phone is in the Walkie-Talkie standby
mode, press the DirectLinksoft key (example of
Walkie-Talkie from handset #1).
2Select the handset to which you wish to Walkie-
Talkie with by pressing the number keys (0-9).
Your handset will then page the other handset.
3On the receiving handset, press TALK/FLASH, the
ANSWERsoft key, or if Anykey Answer is on, press
any number key, /TONE/ , or #/ .
4When you finish your conversation, press ENDor the END soft key on
either handset. Return the handset to the cradle, or press the CANCELsoft
key and then the OKsoft key to return to normal standby mode
(cancelling Walkie-Talkie mode).
Using the Walkie-Talkie Mode
SUN 12:00A
Handset #1
DirectLink Mode
CANCEL
DirectLink
To DirectLink
a handset
press [1-9,0]
BACK
DirectLink
Handset #2
END
• Handsets can be in Walkie-Talkie mode while other handsets are in use.
• While a handset is in a Walkie-talkie mode, it cannot be used to make or receive a call.
Other handsets can still make or receive a call.
Notes:
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 46