Controlling the Onkyo Dock
Connect an Onkyo Dock to the integrated amplifier, and play music files from your iPod.
You can use the integrated amplifier’s remote controller to control basic iPod functions, but the functionality will depend on your iPod model and generation.
To control the Onkyo Dock, an uconnection is required (➔ page 20).
To control the Onkyo Dock with the integrated amplifier’s remote controller, you need to change the input name to “DOCK” (➔ page 35).
8
DIMMER 
!/"
ENTER
Dock control buttons
8button
Sets an Onkyo Dock to Standby.
DIMMER button
Adjusts the display brightness.
!/"and ENTER buttons
Select a music file.
SHUFFLE button
Performs shuffle playback.
MENU button
Opens iPod menu or returns to the previous menu.
REPEAT button
Cycles through the repeat back modes.
7button
Selects the beginning of the current song. Pressing this button twice selects the previous song.
1/3button
Starts or pauses playback.
6button
Selects the next song.
Tip
•If you use your iPod with any other accessories, iPod playback detection may not work.
•Use the integrated amplifier’s volume control to adjust the playback volume.
•While your iPod is inserted in an Onkyo Dock, its volume control has no effect.
Note
•When the Auto Standby function is activated, the power of the Onkyo Dock connected via u is automatically turned off (➔ page 38).
Apple and iPod are trademarks of Apple Inc., registered in the U.S. and other countries.
About Onkyo Dock
Dock is sold separately. Use only the Onkyo Dock with digital connections.
For the latest information on the Onkyo Dock components, see the Onkyo web site at: http://www.onkyo.com
Before using the Onkyo Dock components, update your iPod with the latest software, available from the Apple web site.
For supported iPod models, see the instruction manual of the Onkyo Dock.
En
33
