Using the Integrated Amplifier as a Power Amplifier
Combined with a preamplifier of your choice, the integrated amplifier can be used as a power amplifier (Main mode). When it is selected, the MAIN IN LED lights. See “Connecting Your Speakers” for connection information
(➔ page 13). This is an example of connection using the preamplifier
Important:
•Always turn the integrated amplifier off before connecting the MAIN IN jacks.
•Before setting the integrated amplifier to Main mode, make sure that no component such as a CD player is connected to the MAIN IN jacks, as a direct connection may cause a massive blast sound and damage the integrated amplifier or your speakers.
•This mode can be used with the following limitations:
–The volume level can’t be adjusted.
–Only SPEAKERS and SETUP can be used.
–Only the MAIN IN and SPEAKERS terminals can be used.
–The Auto Standby function is not available (➔ page 38).
•To use this mode, you need to change the “ROUTE” setting (➔ page 39).
Preamplifier P-3000R
Integrated Amplifier
En
25
