Skipping Unused Inputs
You can hide the display of those inputs that are not used, so that they are skipped when selecting an input. Change any input from the following: L1(LINE1), L2(LINE2), L3(LINE3), CX1(COAX1), CX2(COAX2), OPT,
PNO(PHONO)
■Operating with the remote controller
!/"/#/$
ENTER
RETURN
SETUP
1 Press SETUP.
2 Press !/"repeatedly to select “SHOW”.
3 Press ENTER.
4 Press !/"repeatedly to select the input you want to change.
5 Press #/$to switch between ON and OFF.
`ON:
Shows the display of selected input.
`OFF:
Hides the display of selected input.
The setting is automatically confirmed.
6 Press RETURN repeatedly to exit the setup.
■Operating on the integrated amplifier
SETUP | INPUT selector | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 Press SETUP repeatedly to select “SHOW”.
2 Use the INPUT selector to select the input you want to change.
3 Press and hold down SETUP.
The setting is switched ON/OFF.
The setting is automatically confirmed.
4 Press SETUP repeatedly to exit the setup.
Tip
• The default setting is ON.
Note
•The current input doesn’t appear as selectable. For example, if the input is currently set to “LINE1”, “L1” won’t appear as selectable.
•The integrated amplifier will end the setup if there is no operation for 8 seconds.
En
36