Adjusting the Bass, Treble and Balance
You can adjust the bass, treble and left/right output balance respectively.
■Operating with the remote controller
#/$
RETURN
TONE/BAL
1 Press TONE/BAL repeatedly.
`BASS:
`TRBL (Treble):
You can adjust the bass and treble levels from
`L, R (Balance):
The left and right output balance can be adjusted. The more the bars move to the right, the higher the volume will be on the right output. Conversely, the more the bars move to the left, the higher the volume will be on the left output. When no bar appears on the display, the volume is evenly distributed.
2 Press #/$repeatedly.
The adjustment is automatically confirmed.
To exit the adjustment, press RETURN.
■Operating on the integrated amplifier
BASS
1 Press BASS
repeatedly.
The adjustment is automatically confirmed.
Tip
•By default, bass and treble are set to 0, and balance is set to the center position (no visible bars).
Note
•The integrated amplifier will end the adjustment if there is no operation for 5 seconds.
•While the Direct function is enabled, the tone controls are disabled and pressing the buttons will display the message “DIRECT”.
•When headphones are connected, the balance can’t be adjusted and pressing the buttons will display the message “PHONES”.
En
29