Adjusting Audio
and Video
Settings
Using the Setup Screen
Menus
The procedure on this page describes how to operate the menus on the Setup screen. These menus are used to set and adjust a number of system settings. The various functions that can be adjusted are covered throughout this manual. The procedure on this page provides a basic outline for using the Setup screen menus.
When setting up for the first time
It is recommended to set up player using the Setup Navigator (page 20). If you selected [Auto Start Off] when the Setup Navigator appeared, you may still set up the player using the Setup Navigator in the General menu screen.
If you choose not to use the Setup Navigator, be sure to make the necessary settings in the Setup screen Audio 1, Audio 2, Video, and Language menus as described on the following pages.
Some DVDs start playing automatically when loaded in the player. If a DVD has been loaded, be sure to press STOP 7 before proceeding.
Procedures in this section use the
1 |
| OPEN / |
| CLOSE | |
DISPLAY | AUDIO SUBTITLE ANGLE | |
2 | SET UP | TOP MENU |
| MENU |
3, 4, 5, 6 | ENTER |
FUNCTION | VIDEO | DIMMER | JOG MODE |
MEMORY | ADJUST | ||
F.MEM | V.ADJ | FL | JOG |
STOP |
| PLAY | PAUSE |
7 |
| 3 | 8 |
PREVIOUS | NEXT | REV | FWD |
4 | ¢ | 1 | ¡ |
RETURNSTEP / SLOW SEARCH MODE
2 Press SETUP.
The Setup screen appears.
(Example)
Audio1 Audio2 Video Language General
Dolby Digital Out – Dolby Digital
DTS Out – Off
Linear PCM Out – Down Sample On
MPEG Out – MPEG 3 PCM
Digital Out – On
Move | SETUP | Exit |
3 Move the cursor control joystick right or left to select the menu you want.
As each menu is selected with the cursor, the settings appear below the menu heading.
4 Move the cursor control joystick down to enter the menu.
The top item within the menu becomes highlighted.
(Example)
Audio1 Audio2 Video Language General
Dolby Digital Out 
Dolby Digital
DTS Out - 
Dolby Digital 3PCM
Linear PCM Out – Down Sample On
MPEG Out – MPEG 3PCM
Digital Out – On |
|
Move | SETUP Exit |
5 Move the cursor control joystick up or down to select the setting you want to change.
The options available for each setting appear to the right when the setting is selected. The current setting appears with the setting indicator lit.
6 Move the cursor control joystick right to enter the setting options.
(Example)
Audio1 Audio2 Video Language General
Dolby Digital Out 
Dolby Digital
DTS Out - 
Dolby Digital 3PCM
Linear PCM Out – Down Sample On
MPEG Out – MPEG 3PCM
Digital Out – On
Move ENTER Select SETUP Exit
1(1)
e E
CLEAR
1 2 3 C
• | Not all menu options can be changed while a disc |
| is playing. In these cases, the options appear |
| grayed out on the screen and cannot be adjusted. |
| To change these settings, press STOP 7 first |
| before pressing SETUP. |
• | Operating the menu after pressing STOP 7 may |
| cancel the resume function. |
• Some menu options are not immediately | |
| effective if set while a disc is playing. To make |
| these settings effective, stop playback and then |
28
1 Press 
STANDBY/ON on the front panel (
on the remote control).
1 Press POWER on the front panel. (DV- S838A)
start again, or change the settings while the disc |
is stopped. |
continued
En
