Pioneer DV-S88A, DV-SS838A Analog Audio Connection, Channel Audio OUT, Making Connections

Analog Audio Connection

After making physical connections to either the AUDIO OUT FRONT or AUDIO OUT (5.1 channel) analog jacks, be sure to identify which output you are going to be using in the [Analog Jacks] screen of the Setup Navigator (page 22). You can also manually set the output in the [Audio Out] setting of the Setup screen Audio 2 menu (page 32).

Notes

•When [5.1 Channel] is selected, the front right (R) and left

(L) audio channels are output from the AUDIO OUT FRONT jacks.

•The [Audio Out] setting creates an audio output default for the player. If connections are made to both AUDIO OUT FRONT and AUDIO OUT (5.1 channel) analog jacks to make different audio connections for multichannel and stereo audio sources.

2 CHANNEL AUDIO OUT

•Make analog audio connections to a stereo amplifier or receiver.

•Analog audio connections can also be made to a TV or monitor with stereo input jacks.

•Use the supplied audio cable to connect one of the AUDIO OUT FRONT jacks on the player to the audio input on the stereo amplifier or receiver.

•When making analog audio connections, be sure to match the color of the plugs with the color of the jacks (red and white).

•When making this kind of connection, be sure to select [2 Channel] in the Setup Navigator [Analog Jacks] screen (page 22).

Illustration is DV-S838A

AC IN

Y PB PR

525i	525p
(480i)	(480p)

				MENU		D2	1	2	1	2
				SELECT
				COMPONENT VIDEO OUT			S-VIDEO OUT		VIDEO OUT
						AUDIO OUT
				R	FRONT	L	REAR	CENTER
CONTROL	DIGITAL OUT		TV SYSTEM	2		2	LS
OUT IN			NTSC
			PAL
			AUTO	1		1	RS		SUB
									WOOFER
	OPT	COAX

AUDIO OUT

R FRONT L

22

11

AUDIO IN

R L

Stereo amplifier or receiver

5.1 CHANNEL AUDIO OUT

5.1channel audio refers to the current industry surround sound standard requiring two front speakers, a center speaker, two surround (rear) speakers and a sub woofer. Although in actuality there are 6 channels, because the sub woofer channel, or LFE channel, makes up a mere fraction of the total audio soundtrack, it has been designated as the 0.1 of the 5.1 system.

By utilizing the player’s internal multichannel audio decoder, the audio of DVD-Audio, Dolby Digital, DTS and MPEG DVDs can be output from the 5.1 channel discrete outputs to an AV amplifier or receiver with 5.1 channel input capability.

•Use audio cables to make connections from the player’s AUDIO OUT (5.1 channel) jacks to the equivalent input jacks on the AV amplifier or receiver.

•When making 5.1 channel analog audio connections, be sure to match the left and right channels on both components, and also make sure that the jacks of all the channels are connected correctly on both components.

•Either 2 single audio cords or a stereo cord may be used to connect the CENTER and SUB WOOFER channels to the AV amplifier or receiver.

•When making this kind of connection, be sure to select [5.1 Channel] in the Setup Navigator [Analog Jacks] screen (page 22).

Illustration is DV-S838A

					Y	PB	PR				AC IN
							D2	1	2	1	2
					COMPONENT VIDEO OUT			S-VIDEO OUT		VIDEO OUT
							AUDIO OUT
					R	FRONT	L	REAR	CENTER
CONTROL		DIGITAL OUT		TV SYSTEM	2		2	LS
OUT	IN
				NTSC
				PAL
				AUTO	1		1	RS		SUB
										WOOFER
		OPT	COAX

		AUDIO OUT
R	FRONT	L	REAR	CENTER
2		2	LS
1		1	RS	SUB
				WOOFER

5.1CH INPUT CENTER

L

R

FRONT SURROUND SUB

WOOFER

AV amplifier or receiver

MAKING CONNECTIONS

17

En