JVC Model 200 service manual Arc Lamp Power Supply, Low Voltage Power Supply

		Chapter 2---System Description
IIC_DATA	IIC data line. Bidirectional serial line for synchronous data transfer
	between the SCB and the Horizontal/Vertical Deflection board.
	I=Input, O=Output.
	O V_RED_LIN_CONTROL
	O V_GRN_LIN_CONTROL
	O V_BLU_LIN_CONTROL
	O V_RED_EDGE_CONTROL
	O V_GRN_EDGE_CONTROL
	O V_BLU_EDGE_CONTROL
	O L/R_KEY_CONTROL
	O L/R_PIN_CONTROL
	O	WIDTH_CONTROL
	O H_RED_CENT_CONTROL
	O H_GRN_CENT_CONTROL
	O H_BLU_CENT_CONTROL
	O V_RED_CENT_CONTROL
	O V_GRN_CENT_CONTROL
	O V_BLU_CENT_CONTROL
	O	FRONT/REAR
	O	FLOOR/CEIL
		High Voltage Power Supply
INPUT	DESCRIPTION
/HV_OK	The high voltage status line. Low = operational HVPS.
		Low Voltage Power Supply
INPUTS	DESCRIPTION
+ 5.1V	Power for digital portion of SCB
+15V	Power for the analog portions of the SCB
-15V	Power for the analog portions of the SCB
+5.1V_Stby	Standby power to the CPU and peripherals.
/LV_OK	Tells SCB status of non-standby supply (all outputs working or not)
OUTPUTS	DESCRIPTION
FAN_ENA	Signal to enable the 24V standby power
LV_ENA	Signal to enable the LVPS
		Arc Lamp Power Supply
INPUTS	DESCRIPTION
/LAMP_OK	Informs SCB that the Arc Lamp is installed, temperature is within
	limits, and lamp cooling blower is working

2-38 Model 200 Service Manual