
Glossary
| a total of 525 scanning lines in NTSC |
| transmission. |
Horizontal Scan | Reverses the image projection for front or rear |
Reversal Jumper | projection. Located on the Horizontal Deflection |
| Board. |
Horizontal Size Coils | Adjusting coils on the Scan Reversal Board. Used |
| to adjust the horizontal size (width). |
Hot Spot | The Arc Lamp’s brightest area on the screen. |
| Used to align and focus the Arc Lamp. |
Hue | Also referred to as tint. A specific color such a |
| blue, pink or aqua. Hue or tint control on a |
| display device adjusts red/green balance. |
Ignitor | Provides a momentary high voltage to excite the |
| gases in the Xenon Arc Lamp to ignite. |
Image Light Amplifier | A device that uses |
ILA® | modulate a |
| crystal layer. It is a key component in |
| producing very bright, high resolution images |
| from |
Image Mirror | Directs the blue and red images toward the |
| Combining Prism. |
Interlacing | The technique that refreshes a display screen by |
| alternately displaying all the odd lines (field one) |
| and then all the even lines (field two) of one |
| frame. |
I/R Windows | The Series 200 Projector has two I/R windows, |
| one in front, one in back. These windows receive |
| projector control signals from the I/R remotes. |
Lamphouse Dock | The housing that contains the Ignitor, the Laser |
| Power Supply, and the Arc Lamp assembly. |
Laser Power Supply | Provides boost voltage through a spark gap to the |
| Ignitor. |
Lumen | A unit of measure of the flow, or rate of emission, |
| of light. An ordinary wax candle generates 13 |
| lumens while a 100 watt bulb generates 1,200 |
| lumens. |
Model 200 Service Manual |