JVC Model 200 service manual Safety, Updates Tool List

Chapter 1---Introduction

1.0 Introduction

This Service Manual is designed to be used with the Model 200

User’s Guide. This service manual provides information on the:

—Projector functional description;

—Service adjustments, removal and replacement of subassemblies; and

—Troubleshooting.

The user’s guide covers the projector’s installation, operation, setup adjustments, and specifications. Together the service manual and user’s guide provide a qualified service person with information to operate and maintain the projector.

1.1Safety

This projector contains high voltages and high intensity light sources in its internal system and power supplies. Read entire Safety Chapter at the front of this manual before performing any adjustments or maintenance.

When performing procedures that call for projector’s power to be on, always wear high voltage gloves (ANSI/ASTM 10,000 volt rated) when working around the CRTs, Arc Lamp or power supplies. Wear safety goggles (rated X5) when working anywhere near the light path from the Arc Lamp or the projection lens at all times.

1.2Updates

Hughes-JVC will periodically provide bulletin and /or manual supplements to ensure the accuracy of this service manual.

1.3Tool List

The following tools are required to perform service adjustments:

All Purpose Tools=Diagonal Sidecutters, Wirestrippers,

Slot Adjustment Screwdriver (Tweeker),

Mirror/Magnet Pick-Up Tool, Flashlight, 6” Crescent

Wrench, Needlenose pliers, 6” Vise Grips

Balldriver, 1.5mm

Balldriver, 3mm

Balldriver, 3mm, Long

Balldriver, 4mm

Balldriver, 5mm, Long, T-handle

Balldriver, 6mm

Model 200 Service Manual 1-1