JVC Model 200 service manual High Voltage Power Supply cover

Chapter 4---Maintenance (Removal/Replacement)

1.Remove the front and rear covers (Section 4.2).

2.Remove the High Voltage Power Supply cover (Figure 4-5) by removing the 2 pozidrive screws that secure the HVPS at the top of the cover and loosening the 1 pozidrive screw at the bottom of the front flap (Do not remove this bottom screw-it is difficult to reinstall. The HVPS will slide up and over it).

Figure 4-5.High Voltage Power Supply cover.

Figure 4-6High Voltage Power Supply.

3.Carefully slide the cover upward and outward to remove it.

Model 200 Service Manual 4-9