11.4 Quad Display Operation
1 3
Quad Display Control
VCR SEQ
Setup |
| < | < |
|
<>
Chapter 11
2 | 4 | 5 |
1Lock: Security locks out button. Push this button for 2 seconds to enable control panel lock out function. Push this button again for 2 seconds to disable the function.
2VCR: Push this button to enter into VCR Playback/Zoom operation. In this mode, the output video is displaying the video signal from VCR. When operated in Full Screen display mode, push select buttons (#5) to zoom any specific camera signal
3
4
VCR | Quad | CH Select | Function | |
button (#2) | button (#4) | button (#5) | ||
| ||||
|
|
|
| |
ON | ON | OFF | Display quad video signal from VCR tape | |
ON | OFF | Push Once | Call up specific quadrant from tape in full screen mode | |
ON | OFF | Push Twice | Freeze specific quadrant from tape in full screen mode | |
OFF | X | X | Exit VCR operation and back to normal operation mode |
#1, #2 Setup buttons: Push these two buttons simultaneously to get into Menu Setup mode and display page 1 of system setup menu. Push these two buttons simultaneously again to display page 2 of the setup menu. Use page 1 to program time/date and camera title and page 2 to configure alarm operations. Under menu setup mode, Channel Select buttons (#5) are used for cursor control and text selection to program the setup menu. Push the setup but- tons simultaneously again to save the setting. Push the setup buttons fourth time to get back to ordinary operation mode.
Setup buttons (#1, #2) | Function | CH Select buttons (#5) | ||
|
| |||
UP, DOWN | < , > | |||
|
| |||
|
|
|
| |
Push once | Page 1 menu for time / date / title programming | Text Selection | Cursor Control | |
Push twice | Page 2 menu for alarm configuration | Text Selection | Cursor Control | |
Push the third time | Save the settings | Yes / No |
| |
Push the fourth time | Exit setup mode, back to norrnal |
|
| |
Sequ.: Push this button to enable full page auto sequencing mode. Push this button again to disable it..
: Push this button to switch between Quad/ Full Screen display mode.
5
buttons: When operated in Quad mode, these buttons are used to freeze any specific camera by pushing the corresponding button. When operated in Full Screen display mode, these buttons are used to select specific camera to be displayed in full screen.
Quad button (#4) | Channel Select buttons (#5) | Function |
|
|
|
ON | ON | Freeze specific camera video in Quad screen mode |
OFF | ON | Call up specific camera video in full screen mode |
These buttons are also used as cursor control and text select keys under Setup menu mode.
P.36
