Rackmount Solutions RP-119QD Chapter, ALARM I/O Connection & Operation, P.30, Video Loss Alarm

11.2 ALARM I/O Connection & Operation

3 Sensor Activated Alarm

The unit is equipped with 4 alarm sensor inputs. If any alarm is activated:

■the built-in buzzer will be activated.

■the quad will switch the corresponding channel indicator LED to blinking mode.

■a warning message depending on different models will be displayed as follows:

Chapter 11

Quad output channel (#4) LIVE output channel (#5)

	Alarm
			Alarm
Blinking Alarm & Title message on the		Full screen display of the activated channel.
activated channel in quad screen		Also display a blinking Alarm message

Above mentioned alarm can be cleared by: If the device is operated under Security Lock ON mode, Push Lock button for 2 seconds to disable the function then push any button in the front panel.

4 Video Loss Alarm

Loss of video at any input is automatically detected by the device. The device will:

■Activate the built-in buzzer.

■Switch the corresponding channel indicator LED to blinking mode.

■Display warning message on quad screen:

Quad output channel (#4)
		■ The warning message and the buzzer can be cleared
		by pushing Lock button (#2) for more than 4 seconds if the
	Video loss	device is operated under Security lock On mode, or pushing
		any button on the front panel if the device is operated under
		Security lock OFF mode.
Blinking Video Loss & Title message
on the activated channel in quad
screen

P.30