Juniper Networks J-Series Verifying the Alarms Configuration, Displaying Alarm Configurations

Chapter 9: Configuring and Monitoring Alarms

Table 93: Summary of Key Alarm Output Fields (continued)

Field	Values	Additional Information
Received at	Date and time when the alarm condition was
	detected.
Severity	Alarm severity—either major (red) or minor (yellow).	A major (red) alarm condition requires immediate action.
		A minor (yellow) condition requires monitoring or
		maintenance.

Subject Brief synopsis of the alarm.

Clicking the alarm subject displays a detailed alarm message.

Detailed Alarm Message

Received at	Date and time when the failure was detected.
Severity	Alarm severity—either major (red) or minor (yellow).
Alarm Type	Category of the alarm:
	■ Chassis—Indicates an alarm condition on the
	chassis (typically an environmental alarm such
	as temperature)
	■ Configuration—Indicates that no rescue
	configuration is set
	■ ETHER—Indicates an alarm condition on an
	Ethernet interface
	■ DS3—Indicates an alarm condition on a DS3
	interface
	■ License—Indicates a software license
	infringement
	■ Serial—Indicates an alarm condition on a serial
	interface
	■ Services—Indicates an alarm condition on the
	services module

A major (red) alarm condition requires immediate action. A minor (yellow) condition requires monitoring or maintenance.

Verifying the Alarms Configuration

To verify alarms configuration, perform the following task.

Displaying Alarm Configurations

Purpose Verify the configuration of the alarms.

Action From the J-Web interface, select

Configuration>View and Edit>View Configuration Text. Alternatively, from configuration mode in the CLI, enter the show chassis alarms command.

[edit]

user@host# show chassis alarms t3 {

Verifying the Alarms Configuration ■ 175