Chapter 1: Managing User Authentication and Access

To cancel your entries and return to the Users Quick Configuration page, click Cancel.

Table 8: Users Quick Configuration for RADIUS Servers Summary

Field

Function

Your Action

RADIUS Server

 

 

RADIUS Server Address

Identifies the IP address of the RADIUS

Type the RADIUS server’s 32-bit IP address, in

(required)

server.

dotted decimal notation.

RADIUS Server Secret (required)

The secret (password) of the RADIUS

Type the secret (password) of the RADIUS server.

 

server.

Secrets can contain spaces. The secret used must

 

 

match that used by the RADIUS server.

Verify RADIUS Server Secret

Verifies the secret (password) of the

Retype the secret of the RADIUS server.

(required)

RADIUS server is entered correctly.

 

Adding a TACACS+ Server for Authentication

You can use the Users Quick Configuration page for TACACS+ servers to configure a TACACS+ server for system authentication. This Quick Configuration page allows you to specify the IP address and secret of the TACACS+ server.

Figure 2 on page 9 shows the Users Quick Configuration page for TACACS+ servers.

Figure 2: Users Quick Configuration Page for TACACS+ Servers

ERROR: Unresolved graphic fileref="s020242.gif" not found in "\\teamsite1\default\main\TechPubsWorkInProgress\STAGING\images\".

To configure a TACACS+ server with Quick Configuration:

1.In the J-Web interface, select Configuration>Quick Configuration>Users.

2.Under TACACS+ servers, click Add to configure a TACACS+ server.

3.Enter information into the Users Quick Configuration page for TACACS+ servers, as described in Table 9 on page 10.

4.Click one of the following buttons on the Users Quick Configuration page for TACACS+ servers:

To apply the configuration and return to the Users Quick Configuration page, click OK.

To cancel your entries and return to the Users Quick Configuration page, click Cancel.

Managing User Authentication with Quick Configuration 9

Page 31
Image 31
Juniper Networks J-Series Adding a TACACS+ Server for Authentication, Users Quick Configuration for Radius Servers Summary