Juniper Networks J-Series Monitoring IPSec Tunnels, Summary of Key Firewall IDS Output Fields

J-series™ Services Router Administration Guide

Table 73 on page 140 summarizes key output fields for stateful firewall filter intrusion detection.

Table 73: Summary of Key Firewall IDS Output Fields

Field	Values
Source Address	Source address for the event.
Destination address	Destination address for the event.
Time	Total time the information has been in the IDS table.
Bytes	Total number of bytes sent from the source to the destination address, in thousands (k) or millions
	(m).
Packets	Total number of packets sent from the source to the destination address, in thousands (k) or millions
	(m).
Flows	Total number of flows of packets sent from the source to the destination address, in thousands (k)
	or millions (m).
Anomalies	Total number of anomalies in the anomaly table, in thousands (k) or millions (m).
Application	Configured application, such as FTP or Telnet.

Monitoring IPSec Tunnels

IPSec tunnel information includes information about active IPSec tunnels configured on the Services Router, as well as traffic statistics through the tunnels. To view IPSec tunnel information, select Monitor>IPSec in the J-Web interface, or enter the following CLI show commands:

■show services ipsec-vpn ipsec statistics

■show services ipsec-vpn ipsec security-associations

■show services ipsec-vpn ike security-associations

Table 74 on page 140 summarizes key output fields in IPSec displays.

Table 74: Summary of Key IPSec Output Fields

Field	Values
IPSec Tunnels
Service Set	Name of the service set for which the IPSec tunnel is defined.
Rule	Name of the rule set applied to the IPSec tunnel.
Term	Name of the IPSec term applied to the IPSec tunnel.
Local Gateway	Gateway address of the local system.

140■ Using the Monitoring Tools