Table 47: J-Web Monitor Options and Corresponding CLI show Commands (continued)
Corresponding CLI CommandsFunctionMonitor Option
■Route information
■show route terse
■show route detail
■OSPF information
■show ospf neighbors
■show ospf interfaces
■show ospf statistics
■BGP information
■show bgp summary
■show bgp neighbor
■RIP information
■show rip statistics
■show rip neighbors
■DLSw information
■show dlsw capabilities
■show dlsw circuits
■show dlsw peers
■show dlsw reachability
Displays routing information through the following options:
■Route Information—Information about the routes in a routing
table, including destination, protocol, state, and parameter
information. You can narrow the list of routes displayed by
specifying search criteria.
■OSPF Information—Summary of OSPF neighbors, interfaces,
and statistics.
■BGP Information—Summary of BGP routing and neighbor
information.
■RIP Information—Summary of RIP neighbors and statistics.
■DLSw Information—Summary of DLSw circuits and peers.
For details, see “Monitoring Routing Information” on page 115.
Routing
■Interfaces—show class-of-service
interface
■Classifiers—show class-of-service
classifier
■CoS value aliases—show
class-of-service code-point-aliases
■RED drop profiles—show
class-of-service drop-profile
■Forwarding classes—show
class-of-service forwarding-class
■Rewrite rules—show
class-of-service rewrite-rule
■Scheduler maps—show
class-of-service scheduler-map
Displays information about the performance of class of service on
a router through the following options:
■Interfaces—Displays the physical and logical interfaces in the
system and provides details about the CoS components
assigned to these interfaces.
■Classifiers—Displays the forwarding classes and loss priorities
that incoming packets are assigned to based on the packet's
CoS values.
■CoS Value Aliases—Displays the CoS value aliases that the
system is using to represent Differentiated Services code point
(DSCP), DSCP IPv6, MPLS experimental (EXP), and IPv4
precedence bits.
■RED Drop Profiles—Displays detailed information about the
drop profiles used by the system. Also, displays a graph of
the random early detection (RED) curve that the system uses
to determine the queue fullness and drop probability.
■Forwarding Classes—Displays the assignment of forwarding
classes to queue numbers.
■Rewrite Rules—Displays packet CoS value rewrite rules based
on the forwarding classes and loss priorities.
■Scheduler Maps—Displays the assignment of forwarding
classes to schedulers. Schedulers include transmit rate, rate
limit, and buffer size.
For details, see “Monitoring Class-of-Service
Performance” on page 123.
Class of Service
(CoS)
Monitoring Overview ■103
Chapter 7: Monitoring the Router and Routing Operations