Juniper Networks J-Series manual IPSec, Corresponding CLI Commands Interfaces-show mpls interface

J-series™ Services Router Administration Guide

Table 47: J-Web Monitor Options and Corresponding CLI show Commands (continued)

Monitor Option	Function
MPLS	Displays information about MPLS label-switched paths (LSPs) and
	virtual private networks (VPNs) through the following options:
	■ Interfaces—Information about the interfaces on which MPLS
	is enabled, including operational state and any administrative
	groups applied to an interface.
	■ LSP Information—Information about LSP sessions currently
	active on the Services Router, including inbound (ingress) and
	outbound (egress) addresses, LSP state, and LSP name.
	■ LSP Statistics—Statistics for LSP sessions currently active on
	the Services Router, including the total number of packets
	and bytes forwarded through an LSP.
	■ RSVP Sessions—Information about RSVP-signaled LSP
	sessions currently active on the Services Router, including
	inbound (ingress) and outbound (egress) addresses, LSP state,
	and LSP name.
	■ RSVP Interfaces—Information about the interfaces on which
	RSVP is enabled, including the interface name, total
	bandwidth through the interface, and total current reserved
	and reservable (available) bandwidth on the interface.
	For details, see “Monitoring MPLS Traffic Engineering
	Information” on page 130.

Service Sets Displays information about configured service sets.

For details, see “Monitoring Service Sets” on page 135.

Firewall Displays firewall and intrusion detection service (IDS) information through the following options:

■Stateful Firewall—Displays the stateful firewall configuration.

■IDS Information—Displays information about the configured IDS.

For details, see “Monitoring Firewalls” on page 136.

IPSec	Displays configured IPSec tunnels and statistics, and IKE security
	associations.
	For details, see “Monitoring IPSec Tunnels” on page 140.

Corresponding CLI Commands

■Interfaces—show mpls interface

■LSP information—show mpls lsp

■LSP Statistics—show mpls lsp statistics

■RSVP Sessions—show rsvp session

■RSVP Interfaces—show rsvp interface

■show services service-sets summary

■show services service-sets memory-usage

■Stateful firewall information

■show services stateful-firewall conversations

■show services stateful-firewall flows

■IDS information

■show services ids destination-table

■show services ids source-table

■show services ids pair-table

■show services ipsec-vpn ipsec statistics

■show services ipsec-vpn ipsec security-associations

■show services ipsec-vpn ike security-associations

NAT	Displays configured NAT pools.	■ show services nat pool
	For details, see “Monitoring NAT Pools” on page 142.

104■ Monitoring Overview