Chapter 12 Command Shell Overview
Main npsh Command Prefixes
All configurable commands either start with store or set, and view commands start with list.
NOTE: If the store prefix is used, the NIC must be repowered to make the changes take effect. Since store affects flash memory settings only, the print server must reset and read the new settings now in flash memory.
NOTE: If the set prefix is used, a save command must be executed as well so that the new settings are retained after power cycles. Since set only affects the settings in memory, they will be lost after a power cycle unless they are saved to flash memory.
Getting Command Help
The NIC command shell provides several online help tools, including:
“?” Command
Typing “?” when logged in to the command shell will produce a full list of all available commands.
Command Prefixes
Typing in the first portion of a command will produce an error message showing the correct syntax. For example, typing in store tcpip will produce a list of all commands that start with this prefix.
218
