Chapter 1 Interfaces
Speed Setting for 10/100Base-T
When the router is set to
1.10mbps Half Duplex
Use parallel detection because the NIC is using force mode and thus has
PORs to 10mbps Half Duplex. Resets to 10mbps Half Duplex. Reconnection at switch maintains 10mbps Half Duplex.
2.10mbps Full Duplex
Use parallel detection because the NIC is using force mode and thus has
PORs to 10mbps Full Duplex. Resets to 10mbps Full Duplex. Reconnection at switch maintains 10mbps Full Duplex.
3.100mbps Half Duplex
Use parallel detection because the NIC is using force mode and thus has
PORs to 100mbps Half Duplex. Resets to 100mbps Half Duplex. Reconnection at switch results in 100mbps Half Duplex.
4.100mbps Full Duplex
Use parallel detection because the NIC is using force mode and thus has
PORs to 100mbps Full Duplex. Resets to 100mbps Full Duplex. Reconnection at switch results in 100mbps Full Duplex.
5.NIC in Auto mode in 100mbps FD environment
Use auto negotiation to the highest common local and remote capability, i.e. 100FD in this case.
PORs to 100/FD. Resets to 100/FD. Reconnection at switch remains 100/FD.
18
