Chapter 6 Overview
Configuration Checklist
All of the following configuration steps carried out on z/OS require appropriate RACF authority.
1.Using the printer operator panel, set up the IPDS printer emulation to 6408/6412.
2.Set TCP/IP addresses for the printer, such as IP address, gateway address, or subnet mask. See “Configuration Tools” on page 21.
3.Configure the host environment.
See “Configuring PSF for z/OS to Print IPDS Files” on page 127.
4.Verify the configuration. See “Verifying a
5.If you want to share the printer, do the procedure in “Sharing Line Matrix Printers on z/OS” on page 138.
6.If you have problems, refer to “Handling z/OS Connectivity Problems” on page 140.
126
