![](/images/new-backgrounds/1268455/268455573x1.webp)
B Kerberos
Kerberos Enabled Wireless NIC Configuration
This section provides an example of how a user configures the Print Server to use the Kerberos authentication via the wired Telnet session.
This example assumes Symbol’s Access Point and RF card is used and the Print Server has not been configured for Kerberos authentication. It also assumes that the KDC, Access Point and the Print Server are in the same realm.
NOTE: Kerberos Authentication is only supported on Symbol technologies LA 4121 radio card.
To set up the Print Server for Kerberos authentication, the administrator first has to enable Kerberos in the Access Point according to Symbol’s instructions. Symbol’s Access Point must have its Network time set up with the correct time server. Once the Access Point is configured, the Print Server is ready to be configured for Kerberos authentication.
283