Chapter 12 Complete Command List
start foxttsloopb prn Example: start fox prn
Begin a debugging test on one of the I/O ports on the NIC. The tests available are:
fox | A continuous stream of text sent to the |
| attached printer. This is a good test for |
| troubleshooting hardware as long as the |
| attached printer supports text output. |
tts | A continuous stream of Gandalf 400C |
| |
| printer. |
loopb | Loopback test. Any input characters from the |
| device attached to the I/O port is echoed |
| back. |
stop allprn
Stop an output test on an I/O port.
disable ioportdestinationtftp Example: disable prn
Disable an I/O port so that queued jobs are not printed, or disable a destination so jobs cannot be queued to it.
Example: disable tftp
Disables processing of a boot file located on a TFTP server.
enable ioportdestinationprintermgrtftp Example: enable prn
Enable an I/O port so that queued jobs are printed, or enable a destination so jobs can be queued to it.
Example: enable printermgr
Enables the printer debug port to allow remote printer management software to function.
Example: enable tftp
Enables proccessing of a boot file located on a TFTP server.
254
