Chapter 9 Configuration Screens
The following displays:
Mode: TN5250 | Click here for TN3270 mode |
Host | ok (eg. 204.191.175.114 or |
| host.domain.com) |
Port |
|
Device Description |
|
Message Queue Name |
|
Message Queue Library |
|
Device Type | GENERIC PRINTER |
WSCST Name |
|
WSCST Library |
|
Auto Connect |
|
Start Auto Connect | Click here |
3.Select TN3270E Mode. The following displays:
Configuration for Print Path d2prn
Mode: TN3270 | Click here for TN5250 mode |
Host | ok (eg. 204.191.175.114 or |
host.domain.com) |
|
Port | 23 |
Resource Name |
|
Auto Connect |
|
Stop Auto Connect | Click here |
NOTE: Changes will only take effect after you reset the line matrix printer from the System page.
4. Enter the address of your system for the host IP address
The port address is the port configured for your telnet server. It is usualy port 23.
The Resource name will be the printer name defined in the VTAM portion of your Telnet server configuration. For this example use RMT3.
202
