Printronix Integrated Network Interface Card manual Html Forms, Configuration Tools

Chapter 2 Configuration Tools

store ifc 2 wlan profile <WIFI-PROFILE> <0...6>

The values that can be set are as follows:

0:802.11b operation only

1:mixed 802.11b and 802.11g operation

2:mixed 802.11b and 802.11g operation without support for 5.5 and 11 Mbps basic rates

3:802.11g only operation

4:test 802.11g operation

5:802.11b only operation without support for 5.5 and 11 Mbps basic rates

6:mixed 802.11b and 802.11g operation with support for 5.5 and 11 Mbps basic rates

store ifc 2 wlan wpa <WPA-MODE>

store ifc 2 wlan cipher <WPA-CIPHER>

store ifc 2 wlan passphrase <WPA-PASSPHRASE>

store ifc <IFNUM> wlan country <COUNTRY-CODE>

Refer to page 219 for the complete command list.

HTML Forms

The NIC settings can be configured over TCP/IP through a standard Web browser. The NIC Web pages provide a way to access some of the commands built into the print server.

NOTE: If a router is used, make sure a Gateway value is configured.

To access the NIC home page:

1.Make sure the print server has an IP address and Subnet Mask so it is recognizable on your TCP/IP network.

2.Make sure your network station can successfully ping the NIC over the network.

3.Direct your Web browser to the URL: http://IPaddress

(e.g., http://192.75.11.9)

where IPaddress is the IP address of your NIC.

36