![](/images/new-backgrounds/1268455/268455497x1.webp)
Set Commands
set sysinfo loginfo
Set the NIC debugging information type. Usually this information includes unexpected errors or exceptions from the print server divided into these groups:
sys | General system messages |
tcp | TCP stack messages |
ipx | IPX stack messages |
spx | SPX stack messages |
NOTE: This is not printer or job logging information.
set sysinfo logport nullprnsyslog Example: set sysinfo logport null
Define to where the debugging information should be sent. This can be sent to an output device off of the NIC I/O port or to a central TCP/IP host running a SYSLOG daemon. To set this host, use the command set sysinfo syslog hostIPaddress.
set sysinfo smtp <IPaddress> [port <PORTNUM>] Example: set sysinfo smtp 192.75.11.5 port 25
Define the SMTP (Simple Mail Transfer Protocol) server IP address or domain name and port number where the mail is stored on your network.
Default: Unconfigured, 25
set sysinfo email <EMAIL>
Example: set sysinfo email JohnDoe@Printronix.com
Define the user email address to receive printer and job logging information from a particular logpath on the NIC. Email name is the host or IP name of the user.
Default: Unconfigured
set sysinfo email emailname@domain
Example: set sysinfo email joe@printronix.com
Define the user email address to receive printer and job logging information from a particular logpath on the NIC.
245